OPERATOR’S MANUAL Oscillating Multi Tool Kit Item # 2310 IMPORTANT: You new WEN® tool/equipment has been engineered and manufactured to h
10 OPERATION Work Piece and Work Area Set Up 1. Designate a work area that is clean and well-lit. The work area must not allow access by children
11 MAINTENANCE Procedures not specifically explained in this manual must be performed only by a qualified technician. Warning: To Prevent Serious I
12 TROUBLESHOOTING Problem Causes Solutions Tool will not start. Power cord not connected. Check that power cord is plugged in. No power at outlet.
13 EXPLODED VIEW
14 PARTS LIST Part# Stock# Description Part# Stock# Description 1 2310-001 Screw M8x12 24 2310-024 Stator 2 2310-002 Outside Flange 25 2310-025 R
15 WARRANTY STATEMENT LIMITED ONE YEAR WARRANTY WEN Products is committed to build tools that are dependable for years. Our warranties are consisten
3 CONTENTS Specifications…..……………………………………………………….. 3 General safety rules…….……………………………………………….. 4 Specific safety rules warnings………………………………………
4 GENERAL SAFETY RULES WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric sh
5 e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f. Dre
6 SPECIFIC SAFETY WARNINGS 1. Maintain labels and nameplates on the power tool. These carry important safety information. If unreadable or missing,
7 VIBRATION SAFETY This power tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury
8 ELECTRICAL INFORMATION WARNING: This drill press is for indoor use only. Do not expose to rain or use in damp locations. Guidelines for using ex
9 ASSEMBLY Unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call our
Kommentare zu diesen Handbüchern